Transfer Reduction Driven Gear: Installation
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Install the reduction driven gear assembly.
- Select shims. Refer to , ADJUSTMENT , Transfer Reduction Driven Gear.
- Mount the selected shim onto ball bearing.
- Install the transfer clutch assembly. Refer to , INSTALLATION , Transfer Clutch.
- Install the extension case. Refer to , INSTALLATION , Extension Case.
- Install the transmission assembly to the vehicle. Refer to , INSTALLATION , Automatic Transmission Assembly.