Air Intake Boot: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the cover (A) and clip (B) from air intake boot assembly.

Fig 1: Identifying Cover And Clip Of Air Intake Boot Assembly
Courtesy of SUBARU OF AMERICA, INC.
Loosen the clamp (A) which connects the air intake boot assembly and air cleaner case.
Loosen the clamp (B) which connects the air intake boot assembly and throttle body.

Fig 2: Identifying Air Intake Boot Clamps
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the blow-by hose and remove the air intake boot assembly.