FixVault
Home › Subaru › 2011 › Tribeca Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (Fuel Systems) (H6DO - 3.6L DOHC) › Knock Sensor › Removal

Knock Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Remove the intake manifold. Refer to REMOVAL , Intake Manifold.
  4. Disconnect the knock sensor connector.
  5. Remove the knock sensor from cylinder block.
Fig 1: Identifying Knock Sensor Connector
G06651250Courtesy of SUBARU OF AMERICA, INC.
About FixVault