FixVault
Home › Subaru › 2011 › Tribeca Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (Fuel Systems) (H6DO - 3.6L DOHC) › Oil Flow Control Solenoid Valve › Removal › Intake Side

Intake Side

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Disconnect the connector from the intake oil flow control solenoid valve RH.
    Fig 1: Locating Intake Oil Flow Control Solenoid Valve RH Connector
    G05667602Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the intake oil flow control solenoid valve RH.
    Fig 2: Locating Intake Oil Flow Control Solenoid Valve RH
    G05667603Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the intake oil flow control solenoid valve LH in the same procedure as RH.
About FixVault