FixVault
Home › Subaru › 2011 › Tribeca Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (Fuel Systems) (H6DO - 3.6L DOHC) › Oil Temperature Sensor › Removal

Oil Temperature Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Disconnect the connector from oil temperature sensor.
    Fig 1: Locating Oil Temperature Sensor Connector
    G06651286Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the oil temperature sensor.
About FixVault