FixVault
Home › Subaru › 2011 › Tribeca Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Speed Control Systems (H6DO - 3.6L DOHC) › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. Disconnect the ground cable from battery.
  2. Disconnect the connector.
  3. Remove the nut securing accelerator pedal assembly, and remove the accelerator pedal assembly.
Fig 1: Locating Nut Securing Accelerator Pedal Assembly
G05668086Courtesy of SUBARU OF AMERICA, INC.
About FixVault