Rear Seat: Disassembly

Remove the rear seat. < Ref. to REMOVAL , Rear Seat. >
Remove the armrest hinge cover in the direction of the black arrow, and remove the screws to remove the armrest.

Fig 1: Armrest Hinge Cover Removing Direction
Courtesy of SUBARU OF AMERICA, INC.

NOTE: The armrests cannot be detached while the backrest assembly RH and armrest side pin positions are not aligned.

Fig 2: Armrest Side Pin Positions
Courtesy of SUBARU OF AMERICA, INC.
Remove the backrest knob. (Screw-in type)

Fig 3: Backrest Knob (Screw-In Type)
Courtesy of SUBARU OF AMERICA, INC.
Remove the seat backrest latch cover.

Fig 4: Seat Backrest Latch Cover
Courtesy of SUBARU OF AMERICA, INC.
Peel back the backrest cover and remove the hog rings.

Fig 5: Backrest Hog Rings
Courtesy of SUBARU OF AMERICA, INC.
Remove all the hog rings securing the backrest frame and backrest pad.
Remove the headrest bushing.
Remove the backrest pad and backrest cover from the backrest frame.
Disassemble the backrest assembly LH by referring to above procedures.
Remove the bolts on the backside of the seat cushion, and remove the seat table assembly.

Fig 6: Locating Bolts On Backside Of Seat Cushion
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts on the right and left sides, and remove the seat table assembly.

Fig 7: Locating Seat Table Assembly Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts and the seat table hinge.

Fig 8: Locating Seat Table Hinge Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the hooks and the seat table plate.

Fig 9: Hooks And Seat Table Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove all the hog rings on the backside of the seat cushion, and disassemble the seat cushion cover and seat cushion pad.
Detach the plastic zipper and hog ring, and then remove the armrest cover.

Fig 10: Armrest Cover Plastic Zipper
Courtesy of SUBARU OF AMERICA, INC.