FixVault
Home › Subaru › 2012 › Forester X, Standard Trans › Repair and Diagnosis › Transmission › Manual Trans › Manual Transmission And Differential › Front Differential Assembly › Installation

Front Differential Assembly: Installation

  1. Install the differential side retainers using ST.

    ST 18630AA010 WRENCH COMPL RETAINER

  2. Install the bearing outer race to the transmission case.
  3. Install the front differential assembly.
    NOTE: Be careful not to fold the sealing lip of oil seal.
    Fig 1: Installing Front Differential Assembly
    G07666078Courtesy of SUBARU OF AMERICA, INC.
  4. Install the main shaft assembly for single-range. < Ref. to INSTALLATION , Main Shaft Assembly for Single-Range. >
  5. Install the drive pinion shaft assembly. < Ref. to INSTALLATION , Drive Pinion Shaft Assembly. >
  6. Install the transmission case. < Ref. to INSTALLATION , Transmission Case. >
  7. Install the transfer case together with the extension case assembly. < Ref. to INSTALLATION , Transfer Case and Extension Case Assembly. >
  8. Install the manual transmission assembly to the vehicle. < Ref. to INSTALLATION , Manual Transmission Assembly. >
About FixVault