FixVault
Home › Subaru › 2012 › Legacy R › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection Fuel Systems (H6DO) › Mass Air Flow and Intake Air Temperature Sensor › Removal

Mass Air Flow and Intake Air Temperature Sensor: Removal

  1. Disconnect the ground cable from battery.
  2. Disconnect the connector (A) from air flow and intake air temperature sensor.
    Fig 1: Identifying Air Flow And Intake Air Temperature Sensor Connector
    G07912327Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the mass air flow and intake air temperature sensor.
    Fig 2: Locating Mass Air Flow And Intake Air Temperature Sensor
    G07912328Courtesy of SUBARU OF AMERICA, INC.
About FixVault