FixVault
Home › Subaru › 2012 › Outback Base, Automatic CVT Trans › Repair and Diagnosis › Accessories & Equipment › Exterior Lights › Lighting System › Back-up Light Bulb › Removal › Outback Model

Outback Model

  1. Disconnect the ground cable from battery.
  2. Release the claws and remove the bulb inspection cover of rear gate trim
    Fig 1: Removing Claws From Rear Gate Trim Bulb Inspection Cover
    G06653469Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the bulb socket and back-up light bulb.
    Fig 2: Removing Bulb Socket And Back-Up Light Bulb
    G06653482Courtesy of SUBARU OF AMERICA, INC.
About FixVault