Read Current Data
NOTE:
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
- A list of the support data is shown in the following table.
| Display | Contents to be displayed | Unit |
|---|---|---|
| FR Wheel Speed | Wheel speed detected by front ABS wheel speed sensor RH is displayed. | km/h or MPH |
| FL Wheel Speed | Wheel speed detected by front ABS wheel speed sensor LH is displayed. | km/h or MPH |
| RR Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor RH is displayed. | km/h or MPH |
| RL Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor LH is displayed. | km/h or MPH |
| Power Supply Voltage | The voltage supplied to the parking brake control module is displayed. | V |
| Engine Speed | Engine speed is displayed. | RPM |
| Accel. Opening Angle | Acceleration opening is displayed. | % |
| Reverse Signal | Input condition of reverse signal is displayed. (When reverse: ON) | ON or OFF |
| Force Sensor | The tension detected by the force sensor in the actuator is displayed. | N |
| Stroke Sensor | The parking brake cable stroke amount detected by the stroke sensor in the actuator is displayed. | mm |
| Clutch stroke sensor | The pedal stroke amount detected by the clutch stroke sensor is displayed. | % |
| Clutch engagement point | Clutch engagement position is displayed. | % |
| Actuator Inner Temperature(Primary) | Actuator inner temperature (PRY) is displayed. | °C |
| Actuator Inner Temperature(Secondary) | Actuator inner temperature (SEC) is displayed. | °C |
| Incline | Incline of the vehicle is displayed. | % |
| Total Operation Number | Total number of parking brake operation is displayed. | time |
| Hill Hold Operation Number | Operation number of hill hold function at uphill parking is displayed. | time |
| Auto Operation Number | "0" is always displayed. | time |
| Auto Cancel Number | Operation number of automatic accelerator interlock cancel function at starting is displayed. | time |
| Parking Operation Number when driving | Total number of parking brake operation while driving is displayed. | time |
| Engine Torque | Engine torque is displayed. (According to ECM specification, engine torque value may be displayed while engine stops.) | N.m |
| Manual Parking Operation | Parking brake operation condition is displayed. (At manual parking operation: 1) | 1 or 0 |
| Auto Parking Operation | Parking brake operation condition is displayed. (At automatic parking operation: 1) | 1 or 0 |
| Parking Operation when driving | Parking brake operation condition is displayed. (At parking operation when driving: 1) | 1 or 0 |
| Parking Cancel | Parking brake operation condition is displayed. (At parking cancel: 1) | 1 or 0 |
| Hill hold lamp | Hill hold indicator control condition is displayed. (When illuminating: ON) | ON or OFF |
| Ignition Signal | Input condition of ignition signal is displayed. | ON or OFF |
| Brake Warning Light | Brake warning light control condition is displayed. (When illuminating: ON) | ON or OFF |
| Parking System Warning Light | For C6 model, electronic parking brake warning light control condition is displayed. (When illuminating: ON) For other than C6 model, brake warning light control condition is displayed. (When blinking: ON) |
ON or OFF |
| Neutral Signal | Input condition of neutral signal is displayed. (When neutral: ON) | ON or OFF |
| Brake Switch | Input condition of brake pedal signal is displayed. (When depressed: ON) | ON or OFF |
| Engine idle flag | Engine speed condition is displayed. (When idling: ON) | ON or OFF |
| Door Signal | Input condition of door (four locations) open/close signal is displayed. (When at least one door is open: OPEN) | OPEN or CLOSE |
| Driver Seat Belt Signal | Input condition of driver's seatbelt signal is displayed. | Not in use/In use |