Rear Washer: Inspection

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Make sure the nozzle and hose are not clogged.
Make sure the hose is not bent.
While the vehicle is at a standstill, make sure that the washer injection position is as shown in the illustrationn.

NOTE: Washer injection position can not be adjusted.

Fig 1: Identifying Rear Washer Nozzle Spray Position

Courtesy of SUBARU OF AMERICA, INC.