FixVault
Home › Subaru › 2012 › Outback Base, Automatic CVT Trans › Repair and Diagnosis › External Pages › Different car › Section 22 (Wiper System & Washer System) › Wiper and Washer System › Inspection

Wiper and Washer System: Inspection

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM CHART

Symptom Repair order
Wiper and washers do not operate.
  1. Wiper fuse
  2. Combination switch
  3. Wiper motor assembly
  4. Wiring harness
  5. Wiper relay unit
  6. Body integrated unit (rear wiper only)
Wipers do not operate in LO or HI.
  1. Combination switch
  2. Wiper motor assembly
  3. Wiring harness
  4. Wiper relay unit
Wipers do not operate in INT.
  1. Combination switch
  2. Wiper motor assembly
  3. Wiring harness
  4. Body integrated unit (rear wiper only)
Washer motor does not operate.
  1. Combination switch (Washer switch)
  2. Washer motor
  3. Wiring harness
Wipers do not operate when washer switch is ON.
  1. Wiper motor assembly
  2. Wiring harness
Washer fluid spray does not operate properly.
  1. Washer motor
  2. Washer hose and nozzle
About FixVault