FixVault
Home › Subaru › 2012 › Outback Base, Standard Trans › Repair and Diagnosis (Single Page) › Suspension › Wheels & Tire System › Wheel And Tire System › Tire Pressure Monitoring System › Removal › TPMS & Keyless Control Module › OUTBACK model

OUTBACK model

  1. Disconnect the ground cable from battery.
  2. Remove the rear quarter trim LH. Refer to REAR QUARTER TRIM .
  3. Remove the TPMS & keyless control module.
    1. Disconnect the connector.
    2. Remove the bolt and then remove the TPMS & keyless control module.
      Fig 1: Removing TPMS & Keyless Control Module (OUTBACK Model)
      G06653940Courtesy of SUBARU OF AMERICA, INC.
About FixVault