FixVault

Light Control Sensor: Removal

NOTE: The light control sensor is integrated with the sunload sensor.
  1. Disconnect the ground cable from battery.
  2. Remove the light control sensor.
CAUTION: Be careful not to damage the sensors and interior trims when removing.
  1. Release the claws and clips, then detach the side speaker cover (RH).
    Fig 1: Identifying Side Speaker Cover (RH) Claws And Clips
    G06653427Courtesy of SUBARU OF AMERICA, INC.
  2. Push out the light control sensor by pressing the left and right claws.
  3. Disconnect the connector, and remove the light control sensor.
    Fig 2: Disconnecting Light Control Sensor Connector
    G06653428Courtesy of SUBARU OF AMERICA, INC.