FixVault
Home › Subaru › 2012 › Outback Base, Standard Trans › Repair and Diagnosis › Body & Frame › Door Locks › Security And Locks › Keyless Buzzer › Removal

Keyless Buzzer: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the front bumper face. Refer to FRONT BUMPER .
  3. Remove the keyless buzzer.
    1. Disconnect the connector.
    2. Remove the clip, and remove the keyless buzzer.
      Fig 1: Removing Keyless Buzzer And Clip
      G06653941Courtesy of SUBARU OF AMERICA, INC.
About FixVault