FixVault
Home › Subaru › 2012 › Outback Base, Standard Trans › Repair and Diagnosis › Electrical › Horns › Horn System › Relay and Fuse › Inspection › Check Relay

Check Relay

  1. Check the resistance between relay terminals.
    Terminal No. Inspection conditions Specification Circuit
    1 - 2 Always 1 MΩ or more
    G06653408Courtesy of SUBARU OF AMERICA, INC.
    1 - 2 Apply battery voltage between 4 - 3 terminals. Less than 1 Ω
  2. Replace the relay if the inspection result is not within the standard value.
About FixVault