FixVault
Home › Subaru › 2012 › Outback Base, Standard Trans › Repair and Diagnosis › Engine Mechanical › Lubrication System › Lubrication (H6DO) › Oil Pressure Switch › Removal

Oil Pressure Switch: Removal

  1. Disconnect the ground cable from battery.
  2. Lift up the vehicle.
  3. Remove the under cover. Refer to FRONT UNDER COVER .
  4. Drain the engine oil. Refer to , REPLACEMENT , Engine Oil.
  5. Disconnect the terminal from oil pressure switch.
    Fig 1: Identifying Oil Pressure Switch Terminals
    G06651556Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the oil pressure switch.
    Fig 2: Identifying Oil Pressure Switch
    G06651557Courtesy of SUBARU OF AMERICA, INC.
About FixVault