FixVault

Door Step Light: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the front door trim or rear door trim. Refer to REMOVAL , Door Trim.
  3. Disconnect the harness connector.
  4. Remove the mounting screw from the rear side of trim and remove the door step light.
    Fig 1: Identifying Door Step Light Mounting Screw
    G05347124Courtesy of SUBARU OF AMERICA, INC.