Section 22 (Wiper System & Washer System): General Description: Caution

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Connect the connectors and hoses securely during reassembly.
After reassembly, make sure functional parts operate smoothly.
Be careful with the airbag system wiring harness which passes near electrical parts and switches.
All airbag system wiring harness and connectors are colored yellow. Do not use a tester equipment on these circuits.
Care must be taken when connecting the hoses to pipes so that there are no bends or blockage.
If even a small amount of silicon oil or grease enters tank and washer fluid passages, an oil film will be formed on the glass and will cause the wiper to chatter and judder. Make sure that no oil comes into contact with the system.