Rear Trailing Link: Installation
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Be sure to use a new self-locking nut.
- Always tighten bushings with wheels in full contact with the ground and the vehicle at curb weight.
Install in the reverse order of removal.
Tightening torque:
Trailing link
80 N.m (8.2 kgf-m, 59 ft-lb)
Parking Brake Cable bracket
33 N.m (3.4 kgf-m, 24 ft-lb)