FixVault
Home › Subaru › 2012 › Outback Base, Standard Trans › Repair and Diagnosis › External Pages › Different car › Section 45 (Anti-Theft System - Security And Locks) › Security System › Inspection › Security System On/Off Setting

Security System On/Off Setting

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close all doors and rear gate, and sit in the driver's seat. Press the UNLOCK button of the keyless transmitter.
  2. Turn the ignition switch to ON.
  3. Push the centralized door lock switch down and open the driver's side door at the same time, and hold in this condition for 10 seconds
  4. If the security system is ON, it will turn OFF. If OFF, it will turn ON.
Setting Horn activation Meter display
ON → OFF Twice [AL_OF]
OFF → ON Once [AL_ON]
About FixVault