FixVault

Sunroof Assembly: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the roof trim. Refer to ROOF TRIM REMOVAL, Roof Trim.
  3. Disconnect the harness connector of sunroof motor.
  4. Remove the glass lid. Refer to REMOVAL , Glass Lid.
  5. Remove the drain tube from frame assembly.
  6. Remove the bolts, and then detach the frame assembly.
Fig 1: Locating Frame Assembly And Bolts
G05033676Courtesy of SUBARU OF AMERICA, INC.