FixVault

Warning Box: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from the battery.
  2. Remove the upper grille. Refer to UPPER GRILLE , REMOVAL, Air Vent Grille.
  3. Remove the screws of warning box (1) and pull out the warning box.
    Fig 1: Identifying Warning Box Screws
    G05033568Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the connector in the rear side of warning box to remove the warning box.