FixVault
Home › Subaru › 2012 › Outback Base, Standard Trans › Repair and Diagnosis › External Pages › Different variant/trim › Section 7 (Continuously Variable Transmission) › Oil Pump Chain › Disassembly › Drive Sprocket

Drive Sprocket

WARNING: This page is about a different variant/trim than selected.
  1. Remove the ball bearing using ST.

    ST1 498077600 REMOVER

    ST2 399513600 INSTALLER

    Fig 1: Identifying Ball Bearing On Drive Sprocket With Remover And Installer
    G06654751Courtesy of SUBARU OF AMERICA, INC.
About FixVault