FixVault
Home › Subaru › 2012 › Outback Base, Standard Trans › Repair and Diagnosis › Maintenance › Procedures › General Information › Timing Belt › Inspection › SOHC Model (Other Inspections)

SOHC Model (Other Inspections)

  1. Remove the front timing belt cover and timing belt cover (LH).
  2. While cranking engine at least four rotations, check the timing belt back surface for cracks or damage. Replace the faulty timing belt with new part as needed.
  3. When the side part of timing belt is abnormally worn (fluff or jumping out of core) or damaged, check the idlers, tensioner, water pump pulley and cam sprocket to determine idler alignment (squareness). Replace the worn timing belt with new part.
  4. Install the front timing belt cover and timing belt cover (LH).
About FixVault