Transfer Drive Gear: Assembly

Set the ST to the bearing inner race, then install the transfer drive shaft.
CAUTION: Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).

ST 398177700 INSTALLER

Fig 1: Installing Transfer Drive Shaft Using ST 398177700 Installer
Courtesy of SUBARU OF AMERICA, INC.
Install the snap ring on the transfer drive shaft.

Fig 2: Identifying Snap Ring
Courtesy of SUBARU OF AMERICA, INC.
Inspect the clearance between the snap ring and the ball bearing. Refer to Transfer Driven Gear .