FixVault
Home › Subaru › 2012 › Outback Limited › Repair and Diagnosis › Transmission › Automatic Trans › Continuously Variable Transmission › Extension Case › Removal

Extension Case: Removal

  1. Remove the transmission assembly from vehicle body. Refer to , REMOVAL , Automatic Transmission Assembly.
  2. Remove the front wheel speed sensor. Refer to , REMOVAL , Front Wheel Speed Sensor.
  3. Remove the harness clip, and remove the extension case.
    NOTE: The total number of extension case mounting bolts is ten.
    Fig 1: Identifying Extension Case Mounting Bolts
    G06654498Courtesy of SUBARU OF AMERICA, INC.
About FixVault