FixVault
Home › Subaru › 2012 › Outback R › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Rear Drive Shaft › Removal

Rear Drive Shaft: Removal

  1. Remove the transmission assembly from the vehicle. Refer to , REMOVAL , Automatic Transmission Assembly.
  2. Remove the rear vehicle speed sensor, and then remove the extension case. Refer to , REMOVAL , Extension Case.
  3. Pull out the rear driveshaft from center differential assembly.
    Fig 1: Identifying Rear Drive Shaft And Reduction Drive Gear
    G05022299Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the drive plate and driven plate.
About FixVault