Rear Axle: Installation
NOTE:
- Be sure to use a new self-locking nut.
- Always tighten bushings with wheels in full contact with the ground and the vehicle at curb weight.
- Install in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Description" for the tightening torque.
Refer to COMPONENT , General Description.
Refer to COMPONENT , General Description.
Refer to COMPONENT , General Description.
Refer to COMPONENT , General Description.
Refer to COMPONENT , General Description.
- Inspect the wheel alignment and adjust if necessary.