FixVault
Home › Subaru › 2012 › Tribeca Touring › Repair and Diagnosis › Electrical › Gauges › Instrumentation/Driver Info › Warning Box › Removal

Warning Box: Removal

  1. Disconnect the ground cable from the battery.
  2. Remove the upper grille. Refer to UPPER GRILLE , REMOVAL, Air Vent Grille.
  3. Remove the screws of warning box (1) and pull out the warning box.
    Fig 1: Identifying Warning Box Screws
    G05033568Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the connector in the rear side of warning box to remove the warning box.
About FixVault