FixVault
Home › Subaru › 2013 › BRZ Limited, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 106 (Lighting System (Interior)) › Lighting System › Customize Function

Customize Function

WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Customization of the lighting system (interior)
    1. Customization using the SSM4
      1. Connect the SSM4 to the DLC3 and turn the ignition to IG ON.
      2. According to the screen of SSM4, select [Each System] →[Body Control] →[Customize] for customizing.
      Display name Initial setting Contents Setting Controller ECM
      [Lighting Time] 15 seconds Set the function to automatically turn off the interior light after all the doors are shut, when the interior light is set to the DOOR mode. 15/7.5/30 seconds Main body ECM (multiplex network body computer)
      [I/L when ACC OFF] [ON] Set the function to automatically turn on the interior light by turning the ignition from ACC ON →OFF, when the interior light is set to the DOOR mode. [ON]/[OFF]
      [I/L ON W/Door Key Unlock] [ON] Set the function to automatically turn on the interior light in accordance with the door unlock operation with the smart key or the mechanical key, when the interior light is set to the DOOR mode. [ON]/[OFF]
      [Room Light when Approached] [ON] Set the function to turn on the interior light when the driver approaches the vehicle carrying the smart key. [ON]/[OFF]
      [Interior Light Control] [ON] Set the function to turn on the interior light by a timer. [ON]/[OFF]
About FixVault