FixVault
Home › Subaru › 2013 › BRZ Limited, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 106 (Lighting System (Interior)) › Lighting System › Data Monitor/Active Test

Data Monitor/Active Test

WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspection with SSM4 (data monitor)
    1. On the SSM4, navigate to the [Data monitor] display, and check the computer data.

      SSM4 screen: [Each System] →[Body Control] →[Data monitor]

      Item name Description/display range Normal value Remarks
      [D Door Courtesy] Status of the front door courtesy light switch ASSY RH
      Display range: [Close]-[Open]      		 [Close]: Close the driver's door.
      [Open]: Open the driver's door.      		 -
      [D Door Lock Pos] Lock/unlock status of the driver's side door
      Display range: [Lock]-[Unlock]      		 [Lock]: When the driver's side door is locked.
      [Unlock]: When the driver's side door is unlocked.      		 -
      [P Door Courtesy] Status of the front door courtesy light switch ASSY LH
      Display range: [Close]-[Open]      		 [Close]: Close the passenger's door.
      Open: Open the passenger's door.      		 -
      [P Door Lock Pos] Lock/unlock status of the passenger's side door
      Display range: [Lock]-[Unlock]      		 [Lock]: When the passenger's side door is locked.
      [Unlock]: When the passenger's side door is unlocked.      		 -
      [Luggage Courtesy SW] Status of the trunk lock ASSY
      Display range: [Close]-[Open]      		 Closed: The trunk is closed.
      Open: The trunk is open.      		 -
      [Ignition] Status of the IG signal Display range: OFF-ON OFF: IG OFF ON: IG ON This item will be displayed as [OFF] in the ACC ON status.
      [ACC SW] Status of the ACC signal Display range: OFF-ON OFF: ACC OFF
      ON: The power mode is ACC ON or IG ON.      		 This item will be displayed as [ON] in the IG ON status.
      [Room lamp output] Status of the map light ASSY
      Display range: OFF-ON      		 OFF: Map light ASSY OFF ON: Map light ASSY ON -
      [key illumination lamp o/p] Status of the key cylinder light Display range: OFF-ON OFF: Key cylinder light OFF ON: Key cylinder light ON -
      [D-Door Courtesy Lamp] Status of the driver's side courtesy light ASSY
      Display range: OFF-ON      		 OFF: Driver's side courtesy light ASSY
      OFF
      ON: Driver's side courtesy light ASSY
      ON      		 -
      [P-Door Courtesy Lamp] Status of the passenger's side courtesy light ASSY
      Display range: OFF-ON      		 OFF: Passenger's side courtesy light
      ASSY OFF
      ON: Passenger's side courtesy light
      ASSY ON      		 -
  2. Inspection with SSM4 (active test)
    1. Using SSM4, display the [Active Test] screen according to the screen and perform check.

      SSM4 screen: [Each System] →[Body Control] →[Active Test]

      Item name Item description Drive
      [Illuminated Entry System]* The lights controlled by the illuminated entry system are turned on OFF/ON
      [D-Door Courtesy Lamp] The driver's side courtesy light ASSY is turned on OFF/ON
      [P-Door Courtesy Lamp] The passenger's side courtesy light ASSY is turned on OFF/ON
      [Key illumi. Lamp] The key cylinder light is turned on OFF/ON
      NOTE: *: Perform the inspection with the changing switch of the map light ASSY set to the DOOR mode.

      SSM4 screen: [Each System] →[Body Control] →[Active Test]

      Item name Item description Drive
      [Key illumi. Lamp] Turn on the text illumination of the push button start switch. Stop/output
About FixVault