FixVault
Home › Subaru › 2013 › BRZ Limited, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 107 (Engine Control System (Diagnostics - Introduction)) › DTC Table › Inspection For Problems That Do Not Normally Occur

Inspection For Problems That Do Not Normally Occur

WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspection for problems that do not normally occur
    1. Clear the DTC. (Refer to CHECKING/CLEARING DTC )
    2. Perform repeatability test.
    3. Perform visible inspection and connection inspection of the connector and each terminal.
    4. Check the wiring harness and connector for excessive force.
About FixVault