FixVault
Home › Subaru › 2013 › BRZ Limited, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 32 (Wireless Door Lock Control System (Service Information)) › Door Control Transmitter (Without Smart Entry) › Installation

Door Control Transmitter (Without Smart Entry): Installation

WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation of transmitter battery (Refer to TRANSMITTER BATTERY (WITHOUT SMART ENTRY) )
  2. Installation of door transmitter gasket
    1. Install the door control transmitter gasket.
  3. Installation of door control transmitter module set
    1. Install the door control transmitter module set to the transmitter housing case.
      G12589216Courtesy of SUBARU OF AMERICA, INC.
  4. Installation of transmitter housing cover
    1. Install the transmitter housing cover to the transmitter housing case.
    2. Check that the main body LED illuminates when any of the remote control switches is pressed.
      G12589217Courtesy of SUBARU OF AMERICA, INC.
About FixVault