FixVault
Home › Subaru › 2013 › BRZ Limited, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 9 (Engine Starting System) › Key Interlock System › Function Inspection

Function Inspection

WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Key interlock function check
    1. Turn the ignition switch to ON.
    2. Depress the brake pedal and place the shift lever in a position other than the P position.
    3. Check that the ignition key cannot be turned to the LOCK position.
    4. Place the shift lever in the P position and turn the ignition key to the LOCK position to check that the ignition key can be pull out.
About FixVault