FixVault
Home › Subaru › 2013 › BRZ Limited, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 91 (Vehicle Stability Control (VSC) System) › Vehicle Stability Control System › Checking/Clearing Diagnostic Codes

Checking/Clearing Diagnostic Codes

WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Diagnostic code output check
    1. Diagnostic code reading by SSM4
      1. Turn the ignition switch to OFF and connect the SSM4 to the DLC3.
      2. Turn IG ON and follow SSM4's display to read the diagnostic code.
        CAUTION: If there is an error, clear the diagnostic code memory after repairing.
  2. Clear the diagnostic code and the freeze frame data.
    1. Diagnostic code clearance by SSM4
      1. Turn the ignition switch to OFF and connect the SSM4 to the DLC3.
      2. Turn IG ON and follow SSM4's display to clear the diagnostic code.
About FixVault