FixVault
Home › Subaru › 2013 › Forester X, Automatic Trans › Repair and Diagnosis › Body & Frame › Windows › Window Glass & Mirrors › Outer Mirror Assembly › Inspection

Outer Mirror Assembly: Inspection

  1. Disconnect the outer mirror connector.
  2. Apply battery voltage between the outer mirror connector terminals and check the mirror operation.
    • Model without mirror heater
      Fig 1: Identifying Outer Mirror Connector Terminals - Model With Mirror Heater
      G05957840Courtesy of SUBARU OF AMERICA, INC.
      Switch position Terminal No.
      OFF -
      UP 6 (+) and 3 (-)
      DOWN 3 (+) and 6 (-)
      LEFT 7 (+) and 3 (-)
      RIGHT 3 (+) and 7 (-)
    • Model with mirror heater
      Fig 2: Identifying Outer Mirror Connector Terminals (Model With Mirror Heater)
      G08566420Courtesy of SUBARU OF AMERICA, INC.
      Switch position Terminal No.
      OFF -
      UP 7 (+) and 3 (-)
      DOWN 3 (+) and 7 (-)
      LEFT 8 (+) and 3 (-)
      RIGHT 3 (+) and 8 (-)
      Folding 6 (+) and 3 (-)
      Unfolding 3 (+) and 6 (-)
  3. Replace the outer mirror assembly if faulty is found in the inspection.
    NOTE: There always exists a current of 1.2 mA at the electric retraction terminal.
About FixVault