Rear ABS Wheel Speed Sensor: Installation
CAUTION:
Be careful not to damage the sensor.
Install each part in the reverse order of removal.
Tightening torque:
Sensor
7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
Bracket
7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
NOTE:
Check the identification (mark) on the harness to make sure there is no warpage. (RH: P3 (Aqua), LH: P4 (Brown))