FixVault
Home › Subaru › 2013 › Impreza WRX, 4D Sedan › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (WRX) › Wastegate Control Solenoid Valve › Removal

Wastegate Control Solenoid Valve: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G06336085Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connector (A) from the wastegate control solenoid valve.
  4. Disconnect the vacuum hose (B) and air control hose (C) from the wastegate control solenoid valve.
  5. Remove the wastegate control solenoid valve from the bracket.
    Fig 2: Measuring Resistance Between Oil Flow Control Solenoid Valve Terminals
    G08539910Courtesy of SUBARU OF AMERICA, INC.
About FixVault