FixVault
Home › Subaru › 2013 › Outback Base, Automatic CVT Trans › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Body Integrated Unit › Removal

Body Integrated Unit: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the instrument panel lower cover. Refer to REMOVAL .
  3. Remove the body integrated unit.
    CAUTION: Be careful to keep water and other foreign materials away from body integrated unit.
    1. Remove the harness clip and connector.
    2. Remove the bolts, and remove the body integrated unit.
      Fig 1: Locating Body Integrated Unit Connector And Bolts
      G06653942Courtesy of SUBARU OF AMERICA, INC.
About FixVault