FixVault
Home › Subaru › 2013 › Outback Base, Automatic CVT Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Speed Control System (H4DO) › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G08579605Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connector (A).
  3. Remove the nut (B) securing accelerator pedal assembly, and remove the accelerator pedal assembly.
    Fig 2: Identifying Connector And Nut Securing Accelerator Pedal Assembly
    G08582779Courtesy of SUBARU OF AMERICA, INC.
About FixVault