FixVault
Home › Subaru › 2013 › Outback Base, Automatic CVT Trans › Repair and Diagnosis › External Pages › Different car › Section 29 (Seat System - Seats) › Remote Control Back Rest System › Removal › Remote Control Back Rest Switch

Remote Control Back Rest Switch

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the rear quarter lower trim. < Refer to REMOVAL , Rear Quarter Trim. >
  3. Remove the remote control back rest switch from the rear quarter lower trim.
About FixVault