FixVault
Home › Subaru › 2013 › Outback Base, Automatic CVT Trans › Repair and Diagnosis › External Pages › Different car › Section 40 (Anti-Theft System - Security And Locks) › Keyless Buzzer › Removal

Keyless Buzzer: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the front bumper face. < Refer to FRONT BUMPER FACE , REMOVAL, Front Bumper. >
  3. Remove the bolt, and then remove the keyless buzzer.
    Fig 1: Locating Keyless Buzzer Mounting Bolt
    G05663710Courtesy of SUBARU OF AMERICA, INC.
About FixVault