Operating Cylinder: Disassembly

WARNING: This page is about a different variant/trim than selected.

Remove the boot and push rod.

Fig 1: Identifying Boot And Push Rod
Courtesy of SUBARU OF AMERICA, INC.
Apply compressed air through clutch hose attachment hole.
NOTE: Face the piston hole down and place a piece of wood underneath to prevent the piston from popping out.

Fig 2: Applying Compressed Air Through Clutch Hose Attachment Hole
Courtesy of SUBARU OF AMERICA, INC.
Separate the piston and piston spring.

Fig 3: Identifying Piston And Piston Spring
Courtesy of SUBARU OF AMERICA, INC.