Display Transmitter ID Operation

NOTE: In the following procedure, the Subaru Select Monitor must be used.

Connect Subaru Select Monitor.
On "MAIN MENU" display screen, select "EACH SYSTEM CHECK" and press YES/OK key.
On "SYSTEM SELECTION MENU" display screen, select "TIRE PRESSURE MONITORING" and press YES/OK key.
Press YES/OK key after "TIRE PRESSURE MONITORING" is displayed.
On "TIRE PRESSURE MONITOR DIAGNOSIS" display screen, select "TRANSMITTER ID REGIST CONFIRM" and press YES/OK key.
Select "TRANSMITTER ID DATA MONITOR", and press YES/OK key to display transmitter ID.