FixVault
Home › Subaru › 2013 › Outback Base, Automatic CVT Trans › Repair and Diagnosis › Transmission › Automatic Trans › Continuously Variable Transaxle (CVT) › Oil Pump › Removal

Oil Pump: Removal

  1. Remove the transmission assembly from the vehicle. Refer to REMOVAL .
  2. Remove the torque converter assembly. Refer to REMOVAL .
  3. Remove the oil pump chain cover. Refer to REMOVAL .
  4. Remove the oil pump and the plate.
    Fig 1: Locating Oil Pump And Plate Mounting Bolts
    G08318181Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the O-ring.
    Fig 2: Locating O-Ring
    G08318182Courtesy of SUBARU OF AMERICA, INC.
About FixVault