FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Keyless Entry Control Module › Removal › Wagon/Outback Model

Wagon/Outback Model

  1. Disconnect the ground cable from battery.
  2. Remove the rear quarter trim LH. Refer to OUTBACK MODEL .
  3. Remove the keyless entry control module.
    1. Disconnect the connector.
    2. Remove the bolt and remove the keyless entry control module.
      Fig 1: Removing Keyless Entry Control Module
      G06653940Courtesy of SUBARU OF AMERICA, INC.
About FixVault