FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Access Buzzer › Removal

Access Buzzer: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the front bumper face assembly. Refer to REMOVAL .
  3. Remove the access buzzer.
    1. Disconnect the connector.
    2. Remove the clip and detach the access buzzer.
      Fig 1: Disconnecting Access Buzzer Connector
      G08584987Courtesy of SUBARU OF AMERICA, INC.
About FixVault