FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Receiver › Removal

Anti-Theft System - Security And Locks: Receiver: Removal

NOTE: Except for model with keyless entry
  1. Disconnect the ground cable from battery.
  2. Remove the rear quarter trim LH. Refer to OUTBACK MODEL .
  3. Remove the receiver.
    1. Disconnect the connector.
    2. Remove the bolt and remove the receiver.
      Fig 1: Disconnecting Receiver Connector
      G06653940Courtesy of SUBARU OF AMERICA, INC.
About FixVault